Dawn Mission: More evidence for subterranean ice layer on Ceres

The latest findings and imagery from the Dawn probe orbiting the dwarf planet Ceres in the asteroid belt:

Where is the Ice on Ceres? New NASA Dawn Findings 

Measurements by Dawn instruments indicate the concentrations of hydrogen in the surface of Ceres. In this image, the color scale gives hydrogen content in water-equivalent units, which assumes all of the hydrogen is in the form of H2O. Blue indicates where hydrogen content is higher, near the poles, while red indicates lower content at lower latitudes. Find images, animations and more info here.

At first glance, Ceres, the largest body in the main asteroid belt, may not look icy. Images from NASA’s Dawn spacecraft have revealed a dark, heavily cratered world whose brightest area is made of highly reflective salts — not ice. But newly published studies from Dawn scientists show two distinct lines of evidence for ice at or near the surface of the dwarf planet. Researchers are presenting these findings at the 2016 American Geophysical Union meeting in San Francisco.

“These studies support the idea that ice separated from rock early in Ceres’ history, forming an ice-rich crustal layer, and that ice has remained near the surface over the history of the solar system,”

said Carol Raymond, deputy principal investigator of the Dawn mission, based at NASA’s Jet Propulsion Laboratory, Pasadena, California.

Water ice on other planetary bodies is important because it is an essential ingredient for life as we know it.

“By finding bodies that were water-rich in the distant past, we can discover clues as to where life may have existed in the early solar system,” Raymond said.

Ice is everywhere on Ceres

Ceres’ uppermost surface is rich in hydrogen, with higher concentrations at mid-to-high latitudes — consistent with broad expanses of water ice, according to a new study in the journal Science.

“On Ceres, ice is not just localized to a few craters. It’s everywhere, and nearer to the surface with higher latitudes,”

said Thomas Prettyman, principal investigator of Dawn’s gamma ray and neutron detector (GRaND), based at the Planetary Science Institute, Tucson, Arizona.

Researchers used the GRaND instrument to determine the concentrations of hydrogen, iron and potassium in the uppermost yard (or meter) of Ceres. GRaND measures the number and energy of gamma rays and neutrons emanating from Ceres. Neutrons are produced as galactic cosmic rays interact with Ceres’ surface. Some neutrons get absorbed into the surface, while others escape. Since hydrogen slows down neutrons, it is associated with fewer neutrons escaping. On Ceres, hydrogen is likely to be in the form of frozen water (which is made of two hydrogen atoms and one oxygen atom).

Rather than a solid ice layer, there is likely to be a porous mixture of rocky materials in which ice fills the pores, researchers found. The GRaND data show that the mixture is about 10 percent ice by weight.

“These results confirm predictions made nearly three decades ago that ice can survive for billions of years just beneath the surface of Ceres,” Prettyman said. “The evidence strengthens the case for the presence of near-surface water ice on other main belt asteroids.”

Clues to Ceres’ inner life

Concentrations of iron, hydrogen, potassium and carbon provide further evidence that the top layer of material covering Ceres was altered by liquid water in Ceres’ interior. Scientists theorize that the decay of radioactive elements within Ceres produced heat that drove this alteration process, separating Ceres into a rocky interior and icy outer shell. Separation of ice and rock would lead to differences in the chemical composition of Ceres’ surface and interior.

Because meteorites called carbonaceous chondrites were also altered by water, scientists are interested in comparing them to Ceres. These meteorites probably come from bodies that were smaller than Ceres, but had limited fluid flow, so they may provide clues to Ceres’ interior history. The Science study shows that Ceres has more hydrogen and less iron than these meteorites, perhaps because denser particles sunk while brine-rich materials rose to the surface. Alternatively, Ceres or its components may have formed in a different region of the solar system than the meteorites.

Ice in permanent shadow

Images from NASA’s Dawn spacecraft shows a crater in the northern polar region of Ceres that is partly in shadow year-round. In several craters like this one, bright water ice deposits have been observed by Dawn’s framing camera. This finding suggests that water ice can be stored for significant amounts of time in cold, dark craters on Ceres. Such reserviors are called “cold traps.” At less than minus 260 degrees Fahrenheit (110 Kelvin), they are so chilly that very little of the ice turns into vapor in the course of a billion years. Find gif animation, images, and more info here.

A second study, led by Thomas Platz of the Max Planck Institute for Solar System Research, Gottingen, Germany, and published in the journal Nature Astronomy, focused on craters that are persistently in shadow in Ceres’ northern hemisphere. Scientists closely examined hundreds of cold, dark craters called “cold traps” — at less than minus 260 degrees Fahrenheit (110 Kelvin), they are so chilly that very little of the ice turns into vapor in the course of a billion years. Researchers found deposits of bright material in 10 of these craters. In one crater that is partially sunlit, Dawn’s infrared mapping spectrometer confirmed the presence of ice.

This suggests that water ice can be stored in cold, dark craters on Ceres. Ice in cold traps has previously been spotted on Mercury and, in a few cases, on the moon. All of these bodies have small tilts with respect to their axes of rotation, so their poles are extremely cold and peppered with persistently shadowed craters. Scientists believe impacting bodies may have delivered ice to Mercury and the moon. The origins of Ceres’ ice in cold traps are more mysterious, however.

“We are interested in how this ice got there and how it managed to last so long,” said co-author Norbert Schorghofer of the University of Hawaii. “It could have come from Ceres’ ice-rich crust, or it could have been delivered from space.”

Regardless of its origin, water molecules on Ceres have the ability to hop around from warmer regions to the poles. A tenuous water atmosphere has been suggested by previous research, including the Herschel Space Observatory’s observations of water vapor at Ceres in 2012-13. Water molecules that leave the surface would fall back onto Ceres, and could land in cold traps. With every hop there is a chance the molecule is lost to space, but a fraction of them ends up in the cold traps, where they accumulate.

‘Bright spots’ get names

This video shows the intriguing Occator Crater on Ceres, home to the dwarf planet’s brightest area. It may have been produced by upwelling of salt-rich liquids after the impact that formed the crater. The animated flyover includes topographic and enhanced-color views of the crater, highlighting the central dome feature. The animation was produced by the German Aerospace Center (DLR). Original music by Stefan Elgner, DLR.

Ceres’ brightest area, in the northern-hemisphere crater Occator, does not shine because of ice, but rather because of highly reflective salts. A new video produced by the German Aerospace Center (DLR) in Berlin simulates the experience of flying around this crater and exploring its topography. Occator’s central bright region, which includes a dome with fractures, has recently been named Cerealia Facula. The crater’s cluster of less reflective spots to the east of center is called Vinalia Faculae.

“The unique interior of Occator may have formed in a combination of processes that we are currently investigating,” said Ralf Jaumann, planetary scientist and Dawn co-investigator at DLR. “The impact that created the crater could have triggered the upwelling of liquid from inside Ceres, which left behind the salts.”

Dawn’s next steps

Dawn began its extended mission phase in July, and is currently flying in an elliptical orbit more than 4,500 miles (7,200 kilometers) from Ceres. During the primary mission, Dawn orbited and accomplished all of its original objectives at Ceres and protoplanet Vesta, which the spacecraft visited from July 2011 to September 2012.

Dawn’s mission is managed by JPL for NASA’s Science Mission Directorate in Washington. Dawn is a project of the directorate’s Discovery Program, managed by NASA’s Marshall Space Flight Center in Huntsville, Alabama. UCLA is responsible for overall Dawn mission science. Orbital ATK Inc., in Dulles, Virginia, designed and built the spacecraft. The German Aerospace Center, Max Planck Institute for Solar System Research, Italian Space Agency and Italian National Astrophysical Institute are international partners on the mission team. For a complete list of mission participants, visit: dawn.jpl.nasa.gov/mission

More information about Dawn is available at the following sites:

Video: Air-launched Pegasus rocket orbits eight satellites for hurricane studies

This morning Orbital ATK successfully air-launched a Pegasus XL rocket from a L-1011 aircraft. The rocket deployed eight small satellites for the CYGNSS (Cyclone Global Navigation Satellite System) mission, which will study tropical storms by using the way GPS signals are affected by the atmosphere. (See the CYGNSS Science page on the site of the Univ. of Michigan team that is in charge of the project.)

Cassini captures great views of Saturn’s hexagonal north pole

Some recent images of Saturn’s hexagon shaped cloud patter on its north pole:

Cassini Beams Back First Images from New Orbit

This collage of images from NASA’s Cassini spacecraft shows Saturn’s northern hemisphere and rings as viewed with four different spectral filters. Each filter is sensitive to different wavelengths of light and reveals clouds and hazes at different altitudes. Credits: NASA/JPL-Caltech/Space Science Institute. Full image and caption

NASA’s Cassini spacecraft has sent to Earth its first views of Saturn’s atmosphere since beginning the latest phase of its mission. The new images show scenes from high above Saturn’s northern hemisphere, including the planet’s intriguing hexagon-shaped jet stream.

Cassini began its new mission phase, called its Ring-Grazing Orbits, on Nov. 30 [see earlier posting here]. Each of these weeklong orbits — 20 in all — carries the spacecraft high above Saturn’s northern hemisphere before sending it skimming past the outer edges of the planet’s main rings.

Cassini’s imaging cameras acquired these latest views on Dec. 2 and 3, about two days before the first ring-grazing approach to the planet. Future passes will include images from near closest approach, including some of the closest-ever views of the outer rings and small moons that orbit there.

“This is it, the beginning of the end of our historic exploration of Saturn. Let these images — and those to come — remind you that we’ve lived a bold and daring adventure around the solar system’s most magnificent planet,”

said Carolyn Porco, Cassini imaging team lead at Space Science Institute, Boulder, Colorado.

The next pass by the rings’ outer edges is planned for Dec. 11. The ring-grazing orbits will continue until April 22, when the last close flyby of Saturn’s moon Titan will once again reshape Cassini’s flight path. With that encounter, Cassini will begin its Grand Finale, leaping over the rings and making the first of 22 plunges through the 1,500-mile-wide (2,400-kilometer) gap between Saturn and its innermost ring on April 26.

This view from NASA’s Cassini spacecraft was obtained about two days before its first close pass by the outer edges of Saturn’s main rings during its penultimate mission phase. Credits: NASA/JPL-Caltech/Space Science Institute
Full image and caption

On Sept. 15, the mission’s planned conclusion will be a final dive into Saturn’s atmosphere. During its plunge, Cassini will transmit data about the atmosphere’s composition until its signal is lost.

Launched in 1997, Cassini has been touring the Saturn system since arriving in 2004 for an up-close study of the planet, its rings and moons. Cassini has made numerous dramatic discoveries, including a global ocean with indications of hydrothermal activity within the moon Enceladus, and liquid methane seas on another moon, Titan.

For details about Cassini’s ring-grazing orbits, visit: saturn.jpl.nasa.gov/news/2966/ring-grazing-orbits

The Cassini-Huygens mission is a cooperative project of NASA, ESA (European Space Agency) and the Italian Space Agency. NASA’s Jet Propulsion Laboratory, a division of Caltech in Pasadena, manages the mission for NASA’s Science Mission Directorate, Washington. JPL designed, developed and assembled the Cassini orbiter.

More information about Cassini is at:

===

A repeat showing of the nice video depicting the ring-grazing orbits that Cassini will fly during its final year:

 

====

Video: Japanese cargo ship berths to the ISS

A Japanese cargo ship, named Kounotori 6 H-II Transfer Vehicle or HTV-6, berthed to the International Space Station today: Japan’s “White Stork” Spacecraft Installed on Station | Space Station/NASA .

This video shows highlights of the HTV-6 approach to the station, its capture by the robotic arm on the station, and then the attachment to the berthing port:

This diagram shows the variety of vehicles currently attached to the station:

====

Astro software: Automated Astronomical Object Feature Measurer

Astro Maven Rick Boozer points me to his new application program: Automated Astronomical Object Feature Measurer –

Want to know the size (in kilometers or miles) of a sunspot, lunar crater, festoon on Jupiter, etc. that you see in a photographic image?  My latest software creation called Automated Astronomical Object Feature Measurer (or AAOFM for short) can quickly and accurately tell you the answer.  The app is offered free for download.

Designed to run on Windows, Linux and Mac computers.  Note: This is a beta version and I need feedback concerning any bugs that may exist in the app.  I have installed and run the software successfully on Windows and Linux computers; therefore, input from Mac users would be appreciated.

Click the image below to go to my website and choose the menu option to the left labeled  Automated Astronomical Object Feature Measurer to go to the appropriate download area.